Showing posts with label Trench-Runner. Show all posts
Showing posts with label Trench-Runner. Show all posts

Friday 29 January 2021

Court photo shoot and Troggoth Progress

Does my mech look big in this? 

At the risk of completely eating up the collective good will of people who appreciate my Imperial Knight force, I wanted to show some pictures I took of my completed Knights of Corbenic for the Titan Owner's Club.

Regular visitors to my blog will have seen these knights before, but I thought it would be nice to see them all collected together now that the knight part of the project has drawn to a close.  'The knight part?' I hear you say... Well, even though I've completed the knights and their scion pilots, I still have the household auxiliaries left to finish off and have added a few pictures at the end to give you an idea of what's still to come!

I've posted each knight on its own and with its scion pilot plus a couple of extra images - enjoy!

The Fisher King


Cerastus Knight Lancer - The Fisher King

Piloted by Count Octillus Hiralden


Reef Thresher


Cerastus Knight Lancer - Reef Thresher

Piloted by Countess Caelia Hiralden




Deepdive

Questoris Knight Mageara - Deepdive

Piloted by 'Mad' Baron Pellinore



Conga Blue

Questoris Knight Preceptor - Conga Blue

 Piloted by Hastur Mordent



Barracuda Squall


Dominus Knight Valiant - Barracuda Squall 

Piloted by Sir Parcival Ahabius



Shock Manta


Questoris Knight Paladin - Shock Manta

Piloted by Veles Meridian




Quake Hydra


Acastus Knight Asterius -  Quake Hydra

Piloted by Sir Marcus 'Thunderfist' Harnen



Tide Breaker & Shellback 


Armiger Warglaive - Tidebreaker
Piloted by Ivraine Hiralden

Armiger Warglaive - Shellback
Piloted by Patrocles Hiralden




Mudskipper & Trench Runner


Armiger Helverin - Mudskipper
Piloted by Sir Jayce Arron

Armiger Helverin - Trench-Runner
Piloted by Derrin Pike



Heraldry


The heraldic symbol of the knights of Corbenic is a trident wielding octopoid above a mechanicus cog and shield.  The colours of the Court are green, white, turquoise and gold.


A gathering of Scions


Now that they're all complete, I decided it was about time to photograph my Knight Scions together outside of their cockpits with their trusty Sacristan Techpriest Nautolex


Household Auxiliaries (Work in Progress)


My Knight household is supported by a specialised force of Adeptus Mechanicus troops; the core of this force being the Skitarii Aquis.  My blog has previously featured their Skorpius transport, The Blowfish and a Scout Sentinel walker, Snapper.  Today I wanted to show the rest of the force which I've already built and base coated.

Two small squads of Skitarii, four Kastellan Robots, two Datasmiths and a single Ogryn heavy!  

Skitarii Aquis squad Minnix

Skitarii Aquis squad Brink

Kastellan Robot squadron Alpha led by Datasmith Linerris

Kastellan Robot squadron Beta led by Datasmith Vermitax

Scuba Ogryn Hammerhead

It's a motley crew, but each unit has a lot of character, just like their Household masters!  Expect more pictures once they are completed in the near future... 

Dankhold Troggoth Colossus

Since my last post, I have been working away on my Dankhold Colossus and his Troggoth King rider.  They both still need a lot of work, but I'm pleased with how they're looking so far!

This picture was taken after I'd worked out the main forms including muscle groups and skin folds

I smoothed out the skin so I'd have a nice clean surface to detail after his first firing 

This picture was taken after the first firing - The ankles, knees and toes needed some repairing after being removed from the wooden base so that I could reach the underbelly.  The breakages were anticipated as I had (foolishly?) embedded the wire frame a bit too well into the base!

In this picture you can see that I have tried out some detailing on the first hand - I was quite pleased with the pores and veins.  I also started trying out the crystal geode spines on the back

The crystals were fired in advance and only placed temporarily so I could see how they would look and helped me estimate the gap I would need for the rider

Behold the Dankhold Trogg King!  He is slightly larger than a normal Trogg Boss and I played around a little with his features to make him look a little more intelligent than a normal Dankhold Troggoth

The next stage will be to complete the second leg, add arms, feet and details such as fungal growths 

And finally!


As a thankyou to a friend, I sculpted and cast a Legio Metalica Emblem - as well as sending him a couple of unpainted copies, I also cast one with an embedded pin, painted up and attached it to a purity seal!

The heraldic symbol of Legio Metalica 'The Iron Skulls'

The full seal which is about 10" long!

And for those of you who wish to recite the canticle of the Iron Brotherhood, the binary on the seal translates as follows:

Canticle of the Iron Brotherhood:

We are wrought by the furnaces of Metalica

We are born of fire, devotion and honour

We crush the enemies of mankind

We are bastions of righteous fury

We bring death, hope and obeisance

We walk for the glory of the Omnissiah

We are the Brotherhood of Iron

Tuesday 10 March 2020

Trench-Runner, Conga Blue and the return of an alien menace...

Trench-Runner

He's been in production for around 2 months now, but Trench-Runner is finally complete!

Crashing into Corbenic's ocean depths after jumping from a diving platform, Trench-Runner is a Helverin class suit of Armiger Knight armour who specialises in rapid response deployments.

I feel like I've really captured the feeling of motion by posing the knight with his head and the points of his toes pointing down, while his arms are up at his sides
The chains were deliberately positioned in broad loops so that they look as though they're flying up as the suit drops  
From the side, the splashes look incredibly dynamic!
I put a lot of weathering on the platform support as it's been standing in sea water for a long time 
A close up of the transparent resin splash
A gigantic mine / torpedo sits atop the knight suit's carapace.  It's definitely going to make a big bang...

Making dynamic splashes

Making the resin splash for Trench-Runner was actually a lot more complicated than the large resin pour which I did for Quake Hydra (see my last post).

Because the knight would be interacting with the water, I'd have to build the knight and platform first so that I could work out the dimensions and method for creating the splashes.

I haven't included images of this process as it was pretty straightforward.  Reposing the knight suit was easy enough, with the feet needing the most alteration to get the toes pointing down towards the water while still remaining flat enough to take the weight of the model.

The platform was made from a sector mechanicus strut and a couple of platform sections from the old sector imperialis set which I cut round to mimic the contour of the base (this is intended to suggest a platform extending beyond the visible miniature base). 

I began the splashes by sculpting the shapes from medium grade super sculpey which I patched here and there with a softer grade (the pink areas) as it is easier to shape without deforming the existing splashes.  I sculpted footprints where the knight suit would be entering the water and made sure that it fit the base.  Note that I made the footprints about 1mm larger to accommodate any shrinkage. 

Once I was happy with the sculpt I fired the sculpey then sealed it with basic mod-podge.





The next step in the process was to create a single piece silicon mould of the splash.

As it was to be a single piece mould, I decided to use a glossy flowerpot (which my wife unknowingly donated).  Before anything else, I greased the model with a thin liquid oil to make the de-moulding process easier.

I used a large blob of hot glue to stick the splash to the bottom of the plant pot, ensuring that there were no gaps underneath as otherwise the silicon would creep underneath and make it impossible to de-mould.


Having measured the water volume in advance, I mixed up the correct amount of silicone and used the patented 'put in on top of the vibrating dishwasher for a while' to help any bubbles to rise out of the mixture.  Anyone who's made a mould like this has grown to detest bubbles as much as traffic wardens.

To make sure that I got all of the detail with a nice even coat, I used an old paintbrush (which is now consigned to the bin) to create a 2-3mm silicon mould skin before I poured the rest of the silicone into the mould.


Again, I tapped and vibrated the pot to remove air bubbles following the main pour.  This is not an ideal process, but I've not yet gone down the vacuum chamber route because I just don't make enough casts to make it worthwhile.  Maybe that will change in the future, but for now I just shake it baby!


Once the silicone had fully cured, I greased cleaned then re-greased the mould.  I then mixed exactly the right amount of resin to fill the mould.  Ok, so I actually overestimated it because I forgot to check the volume instead of weight.  Stupid mistake really.

Luckily Mudskipper also needed a resin pour on his base, so I really quickly prepared his a basic clay mould, using the excess resin there so as not to waste any!  It's a good job I chose a resin with a longer working time and went with a slower cure mix in case I had issues!


After 24 hours I de-moulded the resin splash...


Next up, I fully painted the base and platform before making a mould wall around the base with syrene and hot glue.  It's worth noting here that the hot glue slightly deformed the styrene walls, but I could fix any major issues after the base was fully cured.

In order to get the splashes at the correct level, I cut some transparent blue acetate to make a little stand which I then glued to the base.  The walls of the mould were made approximately 2mm taller than the stand so that when the splash piece displaced the wet resin it didn't pour out of the mould!


This was the only test fit I made and as everything had been pre-measured, I was happy that it was correct.


I poured the resin into the mould entirely covering the little stand.  This time I had measured the required amount of resin by volume using water.  Always do this or you run the risk of wasting a lot of expensive resin or needing to mix up smaller batches which never cure as well because the exothermic reaction is partly based on the mix volume.


I then 'dunked' the splashes into the resin pool after jiggling the bubbles out.


And here is the result of the final pour after removing the mould walls.


I had to clean up the edges with wet and dry sandpaper once the resin had fully cured and I then worked back into the splashes with a heavy acrylic medium which eventually dries clear.  I also used this on the miniature's feet and the platform struts to make it look wet and keep the knight in place.

All in all, this was a very complicated but satisfying build!

Meet Conga Blue...

Conga Blue is one of my 3 remaining knights to be joining The Court of the Fisher King.  As with my other knights, I wanted him to be unique and as I had a lot of interesting components in my knight bits box, decided to try some more radical changes to what was originally a Forgeworld Knight Mageara.


Conga Blue is intended to be an underwater mining specialist, hence he is armed with a Las cutting arm, a giant pneumatic pick (with a mechadendrite drill on the back), two vestigial las cutters under the carapace and a huge grinder array making up part of his mouth and chest.


He also has a crotch mounted pnuematic shear.  Because... why not?!

In addition to the weaponry changes, I also heavily modified the rear of Conga Blue's carapace in order to add two really large propellers with guide fins, hinting that he functions more like a giant deep sea sub underwater.


I created two sets of shoulder mounted torpedo launchers instead of using the traditional rocket launcher array as I felt this fit the theme a lot better and made more sense given the suit's primary purpose.


The pick arm was deliberately fashioned to look a little like an anchor - it looks pretty similar to my original sketch.  I'm pretty happy with how it turned out as it took a LOT of sanding to get it looking right.  I watched the whole of Altered Carbon season 2 while making this one arm....


The grinder mouth would look a little odd on a normal knight, but I think it really works for Conga Blue!


Did someone say Tyranids?!

I love Tyranids.  They were the first army I seriously collected and I am a massive fan of the Forgeworld Heirophant sculpted by Tyranid overlord Simon Egan.  The only thing which I feel is missing from the current range is an updated version of an old Epic miniature called (plant your tongue into your cheek) the Tyranid Dominatrix:


Awkward name aside, I really liked the original Dominatrix model and always felt like it represented some of the best Tyranid virtues:

1). It's a psychic linchpin
2). It's a symbiotic combination of several creatures
3). It's a giant scary monster

So, in order to bring it back up to date, I have started redesigning the creature while still trying to keep some of the original features.  I have also decided to come up with a less provocative name at some point...

This initial sketch has some nice plate designs, but I decided it was too chunky as I wanted to move away from the lumbering original and make the beast look a lot more mobile.


This is pretty much where I am with the design at the moment.  Note the longer, thinner limbs, huge bio-cannon and the Zoanthrope like mastermind creature embedded in the armoured carapace.
In addition to its large claws, pointy teeth and toxic tail weapon, I've also  incorporated another interesting feature into the creature's carapace.  The little strawberry seed shapes on the carapace are actually Hormagaunts which are supposed to be hooked into indents in the armour.  They use the creature a transport while it uses them as extra ablative armour and a defense against swarming enemies!

Next up is a study of the controller creature.  As it's supposed to have a direct line to the Norn queen on the hiveship, it clearly needs to be a psychic creature with a swollen Zoanthrope-esque head and have the option of digesting particularly interesting specimens on the battlefield in the same way as a Malanthrope or Lictor (hence the feeder tentacles).

From the picture, you can see that it's almost entirely fused with the main creature and is never actually intended to separate from it.


The next image is another head study, using some of the Heirophant features.

I will be starting construction on this project fairly soon - stay tuned for updates!